How can we help?

Using my connected products

How can I modify my load shedding priority list?
How can I configure the triggering threshold of my smart load shedder ?
Why a connected load shedder rather than an energy meter for the consumption part?
I already have a Home + Control connected installation, what product should I add to measure my solar production and self-consumption?
In addition to my water heater, which energy-consuming appliance(s) can I activate automatically and how?
How do I implement my packs?
What types of installation are the photovoltaic connected packs compatible with?
Why don't I see the "Live view" with details of the instantaneous power, balanced on the 3 phases?
My solar panels already report production data, what is the point of adding a Legrand photovoltaic connected pack?
Can the Connected Dry-Contact abe used instead of a Contactor?
Is this Connected Dry-Contact able to manage appliances such as; rolling-shutters, garage doors etc…?
What are the type of appliances able to be remotely-controlled by the Dry-Contact?
What are the functions of the Connected Dry-Contact?
Do the markings for the power supply part on the connector and the measurement coils for the power measurement have to be strictly observed?
Is it possible to set up alerts related to the level of consumption?
Is it possible to change or even interchange the supplied cores with another Three-Phase Energy Meter with Netatmo ?
What type of power line is it able to measure the Three-Phase Energy Meter with Netatmo?
Is the Three-Phase Energy Meter with Netatmo is able to measure single-phases electrical lines?
What powers can the Three-Phase Energy Meter with Netatmo measure?
Why is it mandatory to fill in the tariff and scheduling information even though the TIC (specific French energy tarification transmission) is connected?
If checked locally (on the product itself), what is the maximum data retention period?
How do I integrate my product into Apple HomeKit (iOs)?
Why the line 5 does not appear when I configure the entries (Menu > Settings > Inputs) directly on the product?
How can I configure the Off peak and Peak hours?
What means the "Total (5)" product marking on the 5th input?
What consumptions does it measure?
Does the ecometer take into account the EJP and "Tempo" tariffs?
Can the connected ecometer be used as a gateway (such as the Gateway Module and the Gateway Power outlet)?
To use the connected ecometer, is it necessary to install a "with Netatmo" starter pack beforehand?
Why do some circuits not appear in the list of products that can be offloaded?

Powered by Zendesk